Welcome, Guest
Username: Password: Remember me

TOPIC: gas boat pre made stringers for zenoah engine

gas boat pre made stringers for zenoah engine 3 years 11 months ago #12683

  • dazzido
  • dazzido's Avatar
  • OFFLINE
  • Posts: 71
  • Thank you received: 1
  • Karma: 0
Hi does anyone know of any place where i can get any pre made stringers for my 52"powerboat or a plan so i can make my own?thanks in advance.DARREN
The administrator has disabled public write access.

Re:gas boat pre made stringers for zenoah engine 3 years 11 months ago #12713

very simple to make your own -- I use 3/8" marine grade birch from local hardware store

just on on a site like Aeromarine or on here is lots of build pics and make em

cheers
Area 51 BS Dream Team - JA = Jack A** + Hugh = "Someday- I'll show you guys " + Dr. "If only I had a friend all the big kids pick on me" Post a Video - Woop Woop Woop


www.youtube.com/user/mistycreekboats
Misty Creek Boats

Zoom Zoom .......
Last Edit: 3 years 11 months ago by Canadian Hot Rod RC Boats.
The administrator has disabled public write access.

Re:gas boat pre made stringers for zenoah engine 3 years 11 months ago #12723

  • marc
  • marc's Avatar
  • OFFLINE
  • Posts: 2413
  • Thank you received: 46
  • Karma: 25
Here's an article that explains about stringers. Most boats use 1/4" marine ply. Some like the Warehouse Hobbies boats do use thicker ply. Choice is yours, just remember to set them at 5" spacing inside. www.modelgasboats.com/Magazine...gine_Rails_101/
Modelgasboats.com - Home of the WARPATH Riggers!

Follow Modelgasboats.com on FACEBOOK - CLICK HERE
"
The administrator has disabled public write access.
Time to create page: 0.226 seconds