JRCBD

More
12 years 4 months ago #23481 by ridgerunner
Replied by ridgerunner on topic JRCBD
No eBay APP ID and/or Cert ID defined in Kunena configurationThat should work really good with that prop.I have a brush cutter shaft with the lower unit on it which I could shorten and put a short flex cable in it and I'm looking for another motor,maybe a 4 cycle.I had a neat little Cruise n Carry outboard,but needed money last year and sold it.It was 6600 and was like this one.
Seems like we forgot about JRCBD and are into building these little outboards.

Please Log in or Create an account to join the conversation.

More
12 years 4 months ago #23585 by Love to Build
Replied by Love to Build on topic JRCBD
Are there any new updates about the DOCK?

Thanks Ron

Please Log in or Create an account to join the conversation.

More
12 years 4 months ago #23588 by Nitrorunner
Replied by Nitrorunner on topic JRCBD

Love to Build wrote: Are there any new updates about the DOCK?

Thanks Ron


FB, RCU and here have been my main resources for the past month or better. IDK if the DOCK will survive, I don't have the resources to give further info on it.

Please Log in or Create an account to join the conversation.

More
12 years 4 months ago #23589 by Ronald Olson
Replied by Ronald Olson on topic JRCBD
Tom Moorehouse is offering to start some gas boat forums on Int'l Waters if there's enough interest.
If you need to join, he's going to open up the site and if you need ot sign up he's asking that you use your real name.

Please Log in or Create an account to join the conversation.

More
12 years 4 months ago #23590 by marc
Replied by marc on topic Re:JRCBD

Ronald Olson wrote: Tom Moorehouse is offering to start some gas boat forums on Int'l Waters if there's enough interest.
If you need to join, he's going to open up the site and if you need ot sign up he's asking that you use your real name.


?!?!?!? I really do wonder sometimes why I've bothered for 15 years with this! Lol

Modelgasboats.com - Home of the WARPATH Riggers!

Follow Modelgasboats.com on FACEBOOK - CLICK HERE
"

Please Log in or Create an account to join the conversation.

More
12 years 4 months ago #23592 by Ronald Olson
Replied by Ronald Olson on topic JRCBD
Me too Marc. I mentioned on his site that we've already got this one and it's under-used.

Please Log in or Create an account to join the conversation.

More
12 years 4 months ago #23594 by marc
Replied by marc on topic Re:JRCBD
It's all good. That just slipped out. :)

Modelgasboats.com - Home of the WARPATH Riggers!

Follow Modelgasboats.com on FACEBOOK - CLICK HERE
"
The following user(s) said Thank You: Ronald Olson

Please Log in or Create an account to join the conversation.

More
12 years 4 months ago #23595 by Ronald Olson
Replied by Ronald Olson on topic JRCBD
Marc, after a while it all gets redundant as you'll end up with the same people asking the same questions on more than one forum site.

Please Log in or Create an account to join the conversation.

  • dave bestpitch
  • Offline
  • "Wind'em up baby"
More
12 years 4 months ago #23602 by dave bestpitch
Replied by dave bestpitch on topic JRCBD
Marc
I think we at races can promote the site, I know I will

West Coast Seaducer Sales
NAMBA Awards Chairman

Please Log in or Create an account to join the conversation.

More
12 years 4 months ago #23605 by Bob DeCortin
Replied by Bob DeCortin on topic Re:JRCBD

marc wrote:

Ronald Olson wrote: Tom Moorehouse is offering to start some gas boat forums on Int'l Waters if there's enough interest.
If you need to join, he's going to open up the site and if you need ot sign up he's asking that you use your real name.


?!?!?!? I really do wonder sometimes why I've bothered for 15 years with this! Lol


I've wondered the same thing especially with my board as the logins as the same.Some guys only have Jims bookmarked and won't go anywhere else.
It would be nice if Jims was open,Ron was in the middle of a boat deal and can't contact the buyer.I've been looking all over FB etc for this guy.

Please Log in or Create an account to join the conversation.

Time to create page: 0.176 seconds