- Thank you received: 0
Sikk
-
Topic Author
Less
More
18 years 2 weeks ago #4056
by
Sikk was created by
Bought a second hand SIKK a lot of compression, got gas to plug , got spark , but won't run. Have any ideas? Driving Me crazy down in La.
Please Log in or Create an account to join the conversation.
- Scott
-
- Offline
- Devoted Enthusiast ... MGB Technical advisor
Less
More
- Posts: 1254
- Thank you received: 23
18 years 2 weeks ago #4065
by Scott
2 stroke Engine Tech of 30+ years, Prop tweeker, Chronic tinkerholic, Home of Motor Heads RC Racing Engines ...
8 time NAMBA National 6 lap heat racing record holder.
Replied by Scott on topic Re:Sikk
warped or loose cylinder, damaged cylinder base gasket will cause a MAJOR air leak and loss of case compression preventing start up ?
A sheared flywheel key will place point of spark in the wrong spot even tho you still have spark ?
These will be your most common places to check :S
A sheared flywheel key will place point of spark in the wrong spot even tho you still have spark ?
These will be your most common places to check :S
2 stroke Engine Tech of 30+ years, Prop tweeker, Chronic tinkerholic, Home of Motor Heads RC Racing Engines ...
8 time NAMBA National 6 lap heat racing record holder.
Please Log in or Create an account to join the conversation.
-
Topic Author
Less
More
- Thank you received: 0
18 years 2 weeks ago #4067
by
Replied by on topic Re:Sikk
THANKS sCOTT, gREAT PLACE TO START. Where can I get a breakdown of a SIKK engine,have any ideas ? I hooked water to the motor to keep it cool if i got it started and noticed some water coming out slowly between the head and block .
Please Log in or Create an account to join the conversation.
-
Topic Author
Less
More
- Thank you received: 0
18 years 1 week ago #4090
by
Replied by on topic Re:Sikk
I want to thank everyone who gave me suggestions on what to check out on my SIKK . I pulled the flywheel and the key was messed up, but also the flywheel was bad.Also changed the gaskets on the carb.Waiting on parts now !!!Thanks to everyone!!!
Colen:-}
Colen:-}
Please Log in or Create an account to join the conversation.
Time to create page: 0.137 seconds