wt-257 carb pop-off pressure
przemeku6 created the topic: wt-257 carb pop-off pressure
Hi everybody, what is the proper pop off and re-seat pressure for 257 carbs?????
thanks for your help!!!!
thanks for your help!!!!
Please Log in or Create an account to join the conversation.
- przemeku6
- Offline
- Posts: 2
- Thank you received: 0
dazzido replied the topic: Re: wt-257 carb pop-off pressure
When i hear about carb pop off pressure what exactly is it and what is the purpose?
cheers Darren
cheers Darren
Please Log in or Create an account to join the conversation.
- dazzido
- Offline
- Posts: 71
- Thank you received: 1
przemeku6 replied the topic: Re: wt-257 carb pop-off pressure
it is a pressure that will pop open a metering inlet needle.
here is a walbro carburetors service manual, very helpful with understanding how those carbs working.
here is a walbro carburetors service manual, very helpful with understanding how those carbs working.
Please Log in or Create an account to join the conversation.
- przemeku6
- Offline
- Posts: 2
- Thank you received: 0
Scott replied the topic: Re: wt-257 carb pop-off pressure
Below a copy/paste of a post made on JRCBD on said subject. Tried to get a tad deeper in laymens terms on the bigger picture of whats going on.
2 stroke Engine Tech of 30+ years, Prop tweeker, Chronic tinkerholic, Home of Motor Heads RC Racing Engines ...
8 time NAMBA National 6 lap heat racing record holder.
Please Log in or Create an account to join the conversation.
- Scott
- Offline
- Devoted Enthusiast ... MGB Technical advisor
- Posts: 1254
- Karma: 27
- Thank you received: 23
Time to create page: 0.068 seconds