New guy here with alot of questions that cover all topics. I haven't run for 20+ years, might get back into it but need some information. Boats that i have.
1. 30" Deep Vee have no idea who made it, running a 3.5 K&B outboard.
2. 36" Prather Tunnel with 11cc K&B outboard.
3. 36" Prather Deep Vee with K&B 7.5 inboard.
4. Prather Outrigger Hydro with 11cc K&B inboard.
5. 36" Aeromarine Cat with K&B 11cc inboard.
6. 43" Aeromarine Cat fully set up for 11cc or bigger twins complete ready to run, but never had a chance to run it.
7. Crap load of Octura props.
8. Ran them at Legg Lake in El Monte, Calif. If you join N.A.M.B.A., do you still get a key to the gate to unload your stuff?

Are the following companys still in business?
1. Prather Boats. Long Beach Calif.
2. K&B Motors used to be in Downey, Calif.
3. Octura Props
4. Aeromarine, New York

Also, on the 43" Aeromarine Cat might want to re-rig for a Zenoah. What company is making the motors that are putting out the most HP,TQ and R.P.M.'s?

Thanks for any input. Mike

And for your last question - The man above Scott

---

makes some of the best engines around - bar none.. heck some even make too much power I heard ....lol

See Scott for ur engine ..........

Welcome aboard

Randy

Scott, thanks for the info, Randy who also responded says you have engines? Do you have a web-site? If not, what am i looking at price wise with rubber motor mounts and would like pipe to exit out the very back of he head not out the side. Thanks, Mike

Thanks, Randy

Scott, forgot to ask for your engines with the rubber mount, how far apart do i need to have the engine stringers?

Thanks again, Mike

Mike,
I do the engine mod thing as a side line business only these past years. Am retired from being a full time 2 stroke tech these days.
My deal is one of providing LABOR services ONLY. Those who wish to have a modified motor done do so by sending me a NIB one ( Preferred ) ... or have it drop shipped from vendor of your choosing. ( used engines can be done, but need tear down & inspection prior to price quoting * I do have parts for service work)
Any aftermarket parts you wish added to your engine ? order also and it will all get modified as required or fitted to engine when Mod work is done.
*My billing is for the Mod service labor and shipping home costs only.

Best contacting me via E-mail where we can talk about your needs and then can best steer you where to get best prices on NIB engines & wanted add-on parts.

Regards,
Scott
E-mail: scott@motorheadsrc.com

Pretty universal on gassers we are on 5" rail spacing. ( Some have done less with custom mounts or creative construction mods.)