going to use this servo in my boat HSR-5990TG comments please.

I tried to look it up on the HiTech RCD site and it told me there were no results. Are you sure the information you posted is correct?

Schatzy & Steve.

This servo can be found at: www.servocity.com/html/hsr-5990tg_servo.html
It should very powerfull and reliable.
For myself I have purchased two of it's "little sister" the Hitec HS-7954SH to set up "in a train" to provide simultanious push-pull action (with double power) to my two Arrow Shark sterndrives.
According to my retailer those are about the best I can get for this purpose, so I guess that Schatzys Hitec servo will be even better on a single rudder.

Cheers!

Woodie.

They look like a real good one, The ones I was useing were around 333oz at 6 v, and TG gears also. Hitec is all I use all dig,

Ron

Okay I am running 2 of them what should I get to power these 2 servos I am using 4pks radio with R614FF receiver

I use lipos, 7.4 volts with a regulator

I have been using LiFe packs lately with great success and no need for regulators. 6.6v 2300 mAh... Good stuff.


www.modelgasboats.com

Sent from my iPhone using Tapatalk.