Insane gen 3 mono

50 stowe created the topic: Insane gen 3 mono

Looking for a new race mono,how is the insane gen 3. it looks like a nice boat. How does it run?
#6501

Please Log in or Create an account to join the conversation.

marc replied the topic: Re:Insane gen 3 mono

Runs great. If you've ever run an Insane mono, this one isn't much different except that's it's got a slightly faster bottom than the older gens. Setup well it is fast and a good racer! I have nothing bad to say about mine. Great quality layup also.

Modelgasboats.com - Home of the WARPATH Riggers!

Follow Modelgasboats.com on FACEBOOK - CLICK HERE
"
#6502

Please Log in or Create an account to join the conversation.

Steve Seebold replied the topic: Re:Insane gen 3 mono

The quality of the Insane boats (all insane boats) is absolutely first class. I have seen the Gen 3 mono's in action and they seem to be a little on the lite side. In my opinion and judging from the ones I've seen, they seem to rock side to side on the straights much like the Seaducers do. If you let one get the start on you, and the driver can stay on the buoys, you better have a really fast boat if you expect to get around them.
#6506

Please Log in or Create an account to join the conversation.

50 stowe replied the topic: Re:Insane gen 3 mono

Thanks guys, when i kill my last aeromarine hull i think i am going to give one a try. Does anybody have a video of them racing in real heat racing water, not on a sheet of glass that makes any boat look good.
#6600

Please Log in or Create an account to join the conversation.

marc replied the topic: Re:Insane gen 3 mono

I raced mine last season with good results. 3rd place at the Northern Nats in London first time out. If I find some video of that race I will post it.

Modelgasboats.com - Home of the WARPATH Riggers!

Follow Modelgasboats.com on FACEBOOK - CLICK HERE
"
#6607

Please Log in or Create an account to join the conversation.

Steve Seebold replied the topic: Re:Insane gen 3 mono

One nice improvement in the Insane Gen 3 over earlier gens is you can use a 90* header and run the pipe straight back.
#6608

Please Log in or Create an account to join the conversation.

Time to create page: 0.069 seconds

User Login

Mailbox

You are not logged in.

© 2017 Modelgasboats.com. All Rights Reserved.